• Ensure the eyelids and natural lashes are clean, dry, and free from oil. Do not apply lashes to irritated, injured, or infected eyes.
• Gently curl the natural lashes if desired.
• Carefully lift one strip from the tray by holding the band—not the fibers.
• Position the lash against the eye to check the fit. If necessary, trim small sections from the outer end of the band.
• Gently flex the band to help it follow the natural curve of the lash line.
• Apply a thin, continuous layer of compatible temporary strip-lash adhesive along the band. If using Curacoro Latex-Free Strip Lash Glue, wait approximately 10–20 seconds or until the adhesive becomes tacky.
• Look slightly downward into a mirror. Using clean fingers, a lash applicator, or rounded-tip tweezers, place the center of the band close to the natural lash line.
• Secure the outer corner, followed by the inner corner.
• Keep the band outside the eye and away from the waterline.
• Press gently along the band for approximately 3–5 seconds, then allow the adhesive to set fully.
• Blend the natural and false lashes carefully with a clean spoolie if needed.
• To remove, peel off from the outer corner and clean the band before storing.

• Pulling the lash from the tray by its fibers → This can loosen the fibers or distort the shape. Always lift from the band.
• Skipping the fitting step → A band that is too long may lift or cause discomfort. Measure each lash before applying glue.
• Trimming from the inner corner → This may remove the shorter fibers needed for a natural transition. Trim small amounts from the outer corner.
• Applying too much adhesive → Excess glue takes longer to set and may spread beyond the micro band. Use a thin, continuous layer.
• Positioning the lash while the glue is wet → Wet adhesive allows the band to slide. Wait until it becomes tacky.
• Placing the band on the waterline → The lash should sit close to the natural lash line but remain outside the eye.
• Pulling the lash off without softening the adhesive → Forceful removal can damage the band and pull natural lashes. Use a compatible eye-area remover first.
• Applying mascara directly to the strip lashes → Heavy mascara buildup can reduce softness and shorten their reusable life. Apply mascara to the natural lashes before placement when possible.
• Soaking or scrubbing the lashes → Aggressive cleaning may deform the fibers or weaken the band. Clean gently according to the care instructions.

Product type — Complete temporary strip lash application kit

Collection — Cloudy Natural Wispy Collection.

Style — Charm Attack.

Design — Defined piecey spikes layered over a soft, fluffy base.

Band — Ultra‑light 0.1mm micro band.

Fiber type — Lightweight synthetic fibers.

Fullness — Slightly fuller through the center.

Outer‑corner effect — Lifted and softly elongated.

Overall finish — Bold, structured, wispy, airy, and dimensional.

Quantity — Five pairs.

Reusability — Multiple uses with correct application, removal, and storage.

Adhesive finish - Dries clear

Adhesive wear - Up to 12–16 hours depending on application and wear conditions

Application tool - Precision lash tweezer

User level — Professional makeup artists and experienced at‑home users.

Lash Care Instructions:

• Soften the adhesive with a compatible eye-area makeup remover before lifting the strip from the eyelid.
• Hold the band and peel the lash away slowly from the outer corner.
• Remove dried adhesive from the band carefully without pulling the fibers.
• Return each lash to its original curved tray after cleaning to help preserve its shape.
• Store the tray closed in a clean, dry place.
• Do not share used strip lashes between individuals.

Tweezer Care: Clean the precision tweezer after use and allow it to dry completely before storage. Do not use the tweezer inside the eye or on the waterline.

Reuse Notice: The number of possible wears depends on adhesive use, makeup buildup, removal technique, cleaning, and storage. A fixed number of reuses should not be promised unless supported by product testing.

Caution: For external cosmetic use only. Avoid direct eye contact and do not apply the lash band or adhesive to the waterline. Do not use on irritated, injured, inflamed, or infected eyes or surrounding skin. Discontinue use if redness, swelling, itching, pain, or persistent discomfort occurs. Remove lashes before sleeping, showering, bathing, swimming, or activities that may compromise safe wear. Keep adhesive out of reach of children.

What type of adhesive comes with the kit?

The kit includes a latex-free, fragrance-free temporary lash adhesive that dries clear and provides a flexible hold.

Is this kit suitable for beginners?

The included adhesive and precision tweezer provide the essential tools for application, but new users should take time to measure the band, trim gradually, use a thin layer of adhesive, and wait until the glue becomes tacky before placement.

Should mascara be applied before or after the lashes?

For better reuse, apply mascara lightly to the natural lashes before placing the strip. Avoid heavy mascara directly on the false-lash fibers.

Should I use professional lash-extension glue if I want longer wear?

No. Never use professional eyelash-extension adhesive with temporary strip lashes. Use only an adhesive specifically formulated for temporary false-lash wear.

What should I do if the 0.1mm band feels too straight before application?

Gently flex the strip between your fingers for several seconds before applying adhesive. This helps pre-form the band to the curve of the eyelid and can reduce tension at the inner and outer corners..

Can these lashes be worn all day?

The lightweight design supports extended cosmetic wear, but actual wear time and comfort depend on the adhesive, application, eye shape, skin oils, environment, and individual sensitivity.