Name: Jumbo Saving XL Promade Tray 20D 0.03 (640 fans)
Brand: Curacoro
Price: 65.17 CAD
Availability: InStock

In stock.Ships in 24h · Free shipping over $50

Free shippingOrders $125+

Expert-ApprovedPro-tested & recommended

Customer FavoriteLoved by verified buyers

Hassle-Free Returns30-day guarantee

Jumbo Saving XL Promade Tray 20D 0.03 (640 fans)

20D volume by the thousand in one double-sided tray

Jumbo Saving XL Promade Tray 20D 0.03 (640 fans) puts 640 fans into one double-sided tray, so a busy studio can work through weeks of appointments before reordering. Each fan is made from PBT synthetic silk and bonded with a light glue bonding point at the base, so it lifts cleanly and seats flush on the natural lash. At 0.03 in a 20D shape the set reads as mega volume rather than heavy. Supplied in C, CC, D curls, so one tray covers most of the styling decisions in a working day. The tray opens from either side, so a second artist can work from the same stock without unpacking a fresh box, and the fans sit arranged for quick, repeatable pick-up.

Product details

Trend/Popularity: Mega volume remains the top tier on most menus, and 20D is what makes a lash line read as one continuous mass rather than separate placements.
Ease & Speed: Everything arrives fanned and bonded, and the double-sided tray keeps 640 fans within reach, so restocking the working tray stops interrupting the appointment.
Income Opportunity: Buying 640 fans in one tray lowers the cost per set and cuts reorder admin, which matters most for studios running several artists on the same stock.

Volume Artists Building a Mega-Volume Menu: The fibre count is already handled, so the service can be priced and sold before hand-fanning at this diameter is second nature.
High-Volume Studios: Identical fan geometry across the tray keeps sets consistent whichever artist is working, which matters on fully booked days.
Studios Managing Stock Across Artists: One jumbo tray covers several chairs, so reordering happens on a predictable cycle instead of mid-week.
Artists with Sparse Natural Lash Lines: Fine fibres close gaps that length alone cannot, without loading each natural lash.

What each construction choice does on the lash line:

20D fan construction: Delivers mega volume from a single placement, so the lash line closes faster.
PBT synthetic silk: Holds the engineered curl through heat and humidity and keeps a soft finish rather than a wiry one.
Light glue bonding point at the base: Keeps the attachment point slim, so the fan seats flush instead of stacking bulk at the root.
0.03 diameter: Minimal weight per fibre is what makes a high fibre count safe on a healthy natural lash.
C, CC, D curls: Curl and length can be matched to the growth angle rather than forced, which is where most sets are won or lost.
640 fans in a double-sided tray: Enough for repeat sets while keeping the station and kit organised.

Cleanse and prime the natural lashes to remove oil, makeup and debris, then let them dry fully.
Tape and map the eye, deciding where the longer lengths will sit before the first fan goes on.
Isolate a single natural lash cleanly and confirm no neighbouring lash is caught.
Pick the fan up at its base and dip only the bonded point — at 0.03 the adhesive wicks up the fibres quickly and closes the fan.
Place the base 0.5-1mm from the lid margin and hold briefly until it grabs, keeping the fan square to the lash.
Let the bond cure fully, then comb through with a clean spoolie to check the fans have stayed open.

Using your usual adhesive dot — a promade base has less contact area than a hand-fanned one, so an unchanged dot shows up as premature shedding. Increase the dot slightly and coat the whole bonded point.
Dipping too deep — at 0.03 the adhesive travels up the fine fibres and closes the fan. Dip only the bonded point.
Applying this density to every client — a sparse or previously stressed lash line may not carry it comfortably. Assess the natural lashes and drop to a lower fibre count where needed.
Rushing isolation because the fans are light — a caught neighbour shows as a gap two weeks later. Isolate fully on every placement.
Leaving the tray open on the station — dust and adhesive vapour settle on the fibres and make pick-up unreliable. Close the box between clients.

Product type: Pre-made promade fans
Fan structure: 20D fan
Diameter: 0.03
Curls: C, CC, D
Fibre: Pbt synthetic silk
Base: A light glue bonding point at the base
Finish: A matte black finish
Quantity: 640 fans per tray
Tray: Double-sided jumbo tray
Sourcing: Vegan, latex-free, cruelty-free
Use: Professional lash extension application only

Adhesive is purchased separately. Patch test new clients for adhesive sensitivity before a full set.

My 20D sets look darker but flatter than I expected — is that the fan or my mapping?

Usually mapping: density arrives early at this fibre count, so a single length through the middle reads as a wall rather than as texture. Step the lengths across the map and vary the curl slightly between layers so the light has something to catch.

Why do my fans close between pick-up and placement?

Either the dip is too deep or the tweezer is gripping above the bonded point and squeezing the fibres together. Grip at the base itself, and discard a fan that has already closed rather than trying to spread it open on the lash.

Can a client with fine natural lashes wear this diameter safely?

A 0.03 fibre is the lightest option in the range, so it is usually the safest way to give a fine lash line visible density. The limit is still the natural lash: check for previous chemical treatment and shorten the length before you add fibre count.

Can I mix this tray with other promade fans in the same set?

Yes, and it is a useful way to control weight and cost — but keep the two in separate zones rather than alternating lash by lash, because different base sizes show as uneven texture. Keep the curl consistent between the layers so they do not fight each other.

How should I adjust my adhesive when the room gets humid?

Humidity speeds the cure, so the base can set before the fan is fully seated, which reads as a weak bond a week later. Move to a slower adhesive with a longer working time rather than speeding up placement, and refresh the dot more often as it skins over.