UV Instaset Clear – UV Glue for Eyelash Extensions
Instant Curing · Stronger Bonds · Superior Retention
UV Instaset Clear is a next-generation UV-activated lash adhesive developed exclusively for trained lash professionals seeking faster application, cleaner curing, and consistently strong results. Using advanced UV glue technology, it cures instantly under UV light, performs reliably in all environments, and delivers long-lasting retention—without the unpredictability of traditional lash adhesives.
Why Clear? The clear liquid formula is suitable for all lash colors. Due to its transparency, UV light penetrates evenly through the adhesive, allowing both the upper and lower surfaces of the bond to cure fully. This ensures optimal activation of photoinitiators and results in a more uniform, complete cure—an inherent advantage of clear UV LED adhesives.
Key features:
-
Clear Liquid Formula: Crystal-clear adhesive suitable for all lash colors with uniform, full-depth curing.
-
Ultra-Fast UV Curing: Cures in 0.5 seconds with ≥5W UV light or 1–1.5 seconds with ≤5W.
-
Low Odour, Client-Friendly: Minimal fumes for a more comfortable experience, ideal for sensitive clients.
-
Up to 6 Weeks Retention: Strong, secure bonding when used with proper technique and aftercare.
-
UV-Activated Performance: Optimized for use with professional UV curing lamps.
-
All-Weather Reliability: Consistent performance regardless of humidity, temperature, or season.
-
Cosmetic Safety Approved: Tested to meet cosmetic safety standards for professional use.
Recommended for trained professionals experienced with UV lash systems.
After Purchase:
-
Storage: Store in a cool, dry place (approximately 20°C), away from direct light. Exposure to light, including indoor lighting and sunlight, can weaken the adhesive’s bonding properties. To maintain its effectiveness, store it in a dark place away from windows, direct sunlight, and any lighting systems in your workspace. Refrigeration is not recommended.
-
Shelf Life: Unopened adhesive can last up to 3 months, with an additional 1 month once opened.
-
Prevent Clogging: Keep the adhesive upright and store it with a silica gel packet in an airtight container to absorb moisture.
-
Humidity Control: Use a silica gel packet in an airtight container to protect the adhesive from moisture, as humidity can degrade its quality over time.
During Use:
-
Dispense: Before each dispense, please shake the adhesive bottle about 20 times so the glue flows smoothly. Dispense only 2–3 drops at a time and use them within 10–15 minutes to minimize curing from the UV light, which can reduce retention.
-
Seal Properly: After each use, ensure the adhesive is sealed tightly to prevent air and moisture exposure.
-
Daily Storage: Keep the adhesive in a dark, airtight container with silica gel during the day to maintain quality.
-
Avoid Humidity & Airflow: Store away from humid areas and airflow sources such as fans or vents.
-
Shelf Life After Opening: For optimal performance, use the adhesive within 4 weeks of opening.
Professional Recommendation
For best results, dispense the UV glue into a glue ring to minimize light exposure and maintain optimal consistency. This helps prevent premature curing and allows for precise application.
FAQ
Can this glue be used with primer and bonder?
Yes. It is compatible with our Primer and Bonder collection to enhance adhesion and retention.
Does this glue require a UV lamp?
Yes. A UV lamp is required for proper curing and performance.
Is a patch test recommended?
Yes. Patch testing is advised for clients sensitive to UV light.
Any application precautions?
Use black under-eye pads and an eyelid cover to protect the skin and eyes from UV exposure.
Disclaimer
This product contains cyanoacrylate and may still cause sensitivities in some individuals. Proper training with a licensed professional is required before use. Technicians should consult their insurance provider to ensure adequate liability coverage. Always use appropriate eye protection during application.
Note: For professional use only. Health Canada and MoCRA registration. Our UV Glue is TPO-free and made in the UK, ensuring a high-quality formula that meets strict European safety standards.
Ingredients: Ethyl Cyanoacrylate, Polymethyl Methacrylate, n-Butyl 2-Cyanoacrylate, Phenyl bis (2,4,6-trimethylbenzoyl) phosphine oxide.
