Limas de uñas de doble cara - Calidad profesional

1. Select the appropriate file based on the nail type and stage of service — begin with the 80/100 file for shaping thick acrylics or gels, or start with 100/180 or 180/240 for natural nails needing less aggressive shaping.
2. File in one direction rather than a back-and-forth sawing motion, which generates heat and can weaken the nail structure.
3. Progress from coarser to finer grit as the shape is established, moving from the 80 or 100 side toward the 180 or 240 side to refine and smooth.
4. Use the fine grit side to gently smooth edges on natural nails or buff the surface before polish or gel application.
5. Wipe away filing dust between grit changes to check progress accurately and avoid buildup affecting the finish.
6. Sanitize or dispose of the file according to your salon's hygiene protocol before use on another client.

• Sawing back and forth instead of filing in one direction — this generates friction heat and can cause nail splitting or peeling; use single-direction strokes for a cleaner edge.
• Using an overly coarse grit on natural nails — the 80 or 100 grit is designed for thick artificial enhancements; applying it directly to natural nails can cause excessive thinning or damage.
• Applying too much pressure while filing — heavy pressure doesn't speed up the process and increases the risk of uneven shaping or nail plate damage; let the grit do the work with a light, steady hand.
• Skipping the fine-grit finishing step — stopping at a coarse or medium grit leaves rough edges that can snag or affect polish adhesion; always progress to a finer grit for a smooth finish.
• Reusing the same file across multiple clients without proper sanitation — this raises hygiene and cross-contamination concerns; follow proper sanitation or single-use disposal practices between clients.

Grit Progression Guide

• 80/100 — Coarse Side Use: Heavy shaping and length reduction on thick acrylics or gels | Fine Side Use: Refining the initial shape after bulk reduction
• 100/180 — Coarse Side Use: Initial shaping and smoothing of acrylic or gel nails | Fine Side Use: Refining and finishing natural or artificial nail edges
• 180/240 — Coarse Side Use: Refining natural nail shape and smoothing edges | Fine Side Use: Buffing the nail surface for polish or gel application

This is a physical filing tool; no liquid ingredients are used, and no clinical or regulatory claims apply.

How do I decide which file to start with when a client has a mix of natural and artificial nails in the same service?

Assess each nail individually rather than applying one file across the whole hand — artificial nails needing length or bulk reduction should start with the 80/100 file, while natural nails only needing edge refinement can go straight to the 180/240 file. Working nail by nail based on actual condition, rather than defaulting to one grit for consistency, gives a better and safer result.

Why do some clients' nails feel rough again shortly after a fine-grit buff, even when the finish looked smooth in the chair?

This is often due to filing dust not being fully removed before assessing the finish, which can mask minor rough spots that become noticeable once the nail is clean. Wiping the nail thoroughly with a lint-free wipe before final inspection helps catch any spots that still need additional buffing.

Is it safe to use the 80 grit side directly on a natural nail if a client specifically requests aggressive shortening?

Even with a client request, the 80 grit is calibrated for thick artificial material and can over-thin or damage a natural nail plate quickly. A safer approach is using nail clippers or scissors for significant length reduction on natural nails, then refining shape with the 100/180 or 180/240 file.

How many client services can I typically expect from one file before it needs to be replaced?

This varies based on how it's sanitized and how much heavy shaping work it's used for, since coarse-grit sides on thick artificial nails wear down faster than fine-grit sides used for light buffing. Many technicians find that files used primarily for enhancement work need replacing more frequently than those reserved mainly for natural nail finishing.

Does the grit pairing on these files differ meaningfully from using two separate single-grit files instead?

The actual filing performance is comparable to using two matched single-grit files, since each side functions independently; the main advantage of the dual-sided format is workflow efficiency rather than a different filing result. Technicians who prefer keeping grits on entirely separate tools for organizational reasons can still expect the same filing outcome either way.