Broca para clavos, broca cilíndrica pequeña (fina), 3/32"

1. Insert the bit fully into the handpiece and lock it; run it briefly at low speed to check it spins true.
2. Hold the handpiece like a pencil and brace your hand for stability.
3. Fine grit removes little product per pass, so use a steady moderate speed and keep the bit moving rather than pressing harder.
4. Work the compact barrel in short, controlled passes over smaller nails, sidewalls and detailed areas.
5. Use light, controlled passes and keep the bit moving at all times.
6. Blend the area with a finer bit or buffer if needed.
7. After the service, brush away debris, clean and disinfect the bit according to your local regulations, and dry it fully before storing.

• Using it for large surfaces: A small barrel takes longer on broad surfaces; switch to a large barrel for full-nail shaping.
• Pressing harder to speed up a fine bit: Extra pressure creates heat rather than faster removal; switch to a coarser grit if more product needs to come off.
• Working too close to the skin: Contact with the skin causes discomfort; keep the bit on the product and away from live tissue.
• Using the wrong rotation direction: Filing towards the skin on the sidewalls increases the risk of nicks; switch direction to suit the side you are working on.
• Pressing too hard: Pressure creates heat and grooves; use light contact and let the bit do the work.

• Bit type: Small barrel
• Grit: Fine
• Material: Carbide
• Shank size: 3/32" (fits most professional nail drills)
• Finish options: Galaxy, Yellow Titanium
• Best for: Gentle shaping, surface refinement, smoothing and finishing
• Care: Brush, clean and disinfect between clients; dry fully before storing
• Use: Professional nail services

Is a small barrel better for short nails?

Yes, a compact barrel is easier to control on short nails and small nail beds, where a large barrel can touch the skin. It is also handy for pinky nails and detailed zones.

Can a fine bit remove product, or is it only for finishing?

A fine bit removes product slowly, which makes it useful for light thinning and blending, but it is inefficient for heavy removal. Use it after a coarser bit to refine the surface and smooth out scratches.

How do I clean a carbide bit properly?

Remove dust with a cleaning brush, then clean and disinfect according to your local hygiene regulations and dry the bit completely. Moisture left in the flutes can lead to rust and reduce cutting performance.

Should I switch rotation direction when working on each sidewall?

Yes, many technicians change direction so the bit moves away from the skin on each side. This reduces the risk of catching the sidewall and gives a cleaner line.

Why do I see grooves near the cuticle line after filing?

Grooves usually come from tilting the bit or pressing too hard in one place. Keep the bit flat to the area you are working on, lighten your pressure and blend with a finer grit.