1. Clean and prep the nail surface, removing dust, oil and surface residue.
2. Apply Nail Dehydrator and Nail Primer Bonder allow it to dry.
3. Apply a thin, even Base Coat and cure in a UV/LED nail lamp for at least 30 seconds.
4. Apply the first thin coat of color and cure for at least 30 seconds.
5. Apply a second thin color coat for full, vibrant coverage and cure again for at least 30 seconds.
6. Finish with Top Coat and cure for at least 60 seconds. Follow the lamp or gel system instructions if a longer cure is required.

• Applying coats too thick: Syrup gel is designed to be layered thinly; thick coats can look uneven or cure poorly.
• Trying to force full opacity: The translucent finish is intentional, so build color gradually instead of overloading one layer.
• Uneven brush pressure: Heavy or inconsistent pressure can create streaks or darker areas in a sheer formula.
• Skipping curing between layers: Each coat should be fully cured before adding another layer.
• Incomplete nail preparation: Oil, moisture or dust can reduce adhesion and shorten wear.
• Flooding the cuticle: Product touching the skin can cause lifting and an untidy finish.
• Skipping Top Coat: The top coat helps seal and protect the glossy syrup finish.
• Leaving the open bottle near sunlight or an active UV/LED lamp: UV exposure can begin curing product around the bottle neck or inside the bottle.

Type: Syrup Gel Color

• Coverage: Sheer to Medium (buildable)
• Finish: Glossy / Glass-Like
• Cure: UV & LED compatible
• Size: 15ml / bottle

Retention Tips:

• Clean and properly prepare the nail surface for better bonding.
• Keep syrup gel layers thin and even for smooth translucency and reliable curing.
• Cure after every gel layer for at least 30 seconds or according to your lamp/system requirements.
• Always finish with Top Coat to seal and protect the glossy finish.
• Keep bottles closed in a cool, dry, shaded area away from direct sunlight and active UV/LED lamps.

Is syrup gel supposed to be transparent?

Yes. Syrup gel is designed to create a translucent, glass-like finish rather than full opaque coverage.

How many coats are recommended?

One thin coat creates a softer sheer wash, while two thin coats build more color depth and a juicier finish.

Can this gel cure in both UV and LED lamps?

Yes. Cure each gel layer for at least 30 seconds or longer if required by your lamp or gel system.

Can syrup gel be used for French bases and ombré designs?

Yes. Its translucent, buildable coverage makes it well suited to French bases, natural overlays, gradients and layered designs.

How should the bottle be stored?

Keep it tightly closed in a cool, dry, shaded place away from direct sunlight and active UV/LED lamps.