1. Clean and prep the nail surface, removing dust, oil and surface residue.
2. Apply Nail Dehydrator and Nail Primer Bonder allow it to dry.
3. Apply a thin, even Base Coat and cure in a UV/LED nail lamp for at least 30 seconds.
4. Apply the first thin coat of color and cure for at least 30 seconds.
5. Apply a second thin color coat for full, vibrant coverage and cure again for at least 30 seconds.
6. Finish with Top Coat and cure for at least 60 seconds. Follow the lamp or gel system instructions if a longer cure is required.

• Applying glitter gel too thick: Heavy layers can become uneven, bulky or under-cured.
• Over-brushing the same area: Repeated strokes can drag glitter away and create patchy concentration.
• Uneven glitter distribution: Check the nail before curing and gently reposition glitter where needed.
• Skipping curing between coats: Each layer should be fully cured before adding more product.
• Incomplete nail preparation: Oil, moisture or dust can reduce bonding and shorten wear.
• Flooding the cuticle: Glitter gel touching the skin can cause lifting and an untidy edge.
• Skipping Top Coat: A proper top coat helps smooth the glitter texture and protect the reflective finish.
• Leaving the open bottle near sunlight or an active UV/LED lamp: UV exposure can begin curing product around the bottle neck or inside the bottle.

Type: Glitter Gel Color

• Coverage: Medium to Full (buildable, 1–2 coats)
• Finish: High Sparkle / Reflective
• Cure: UV & LED compatible
• Size: 15ml / bottle

Retention Tips:

• Clean and properly prepare the nail surface for better bonding.
• Apply thin, even glitter layers and avoid bulky glitter concentration near the cuticle or sidewalls.
• Cure after every gel layer for at least 30 seconds or according to your lamp/system requirements.
• Always finish with Top Coat to smooth, seal and protect the glitter finish.
• Keep bottles closed in a cool, dry, shaded area away from direct sunlight and active UV/LED lamps.

How many coats are recommended?

One coat gives visible sparkle and color, while two thin coats provide stronger, fuller coverage.

Can this glitter gel cure in both UV and LED lamps?

Yes. Cure each gel layer for at least 30 seconds or longer if required by your lamp or gel system.

Can it be used for both full glitter nails and accent designs?

Yes. The formula is suitable for full coverage, accent nails, nail art and layered sparkle effects.

How do I keep the glitter looking even?

Apply thin coats with light brush pressure and check glitter distribution before curing. Avoid repeatedly brushing the same area.

Is Top Coat necessary?

Yes. Top Coat helps smooth the surface, seal the glitter and protect the reflective finish.

How should the bottle be stored?

Keep it tightly closed in a cool, dry, shaded place away from direct sunlight and active UV/LED lamps.