1. Shake vigorously for 45–60 seconds before use.
2. Dispense a fresh adhesive drop onto your preferred glue surface.
3. Dip approximately 1–2 mm of the lash or fan base into a minimal amount of adhesive.
4. Attach the extension approximately 0.5 mm away from the lash line.
5. Replace the adhesive drop when its texture or performance begins to change.

Pro Tip: If Perfect Clear is curing too slowly, use a humidifier to gradually increase the humidity in your workspace. Higher humidity accelerates cyanoacrylate curing, so monitor your hygrometer and stay within the recommended working range.

• Picking up too much clear adhesive → Because the glue is transparent, the amount can be harder to see. Use a controlled dip and check the lash base carefully.
• Working too slowly after dipping → A 1–2 second adhesive requires consistent isolation and placement.
• Ignoring changes in humidity → Higher humidity causes lash adhesive to cure faster, while lower humidity slows it down.
• Using an old adhesive drop → Refresh the glue when it begins to thicken or behave differently.
• Poor natural-lash attachment → Make sure the extension base sits flush against the natural lash to create sufficient bonding contact.

Size: 5ML

Color: Clear

Viscosity: Thin

Skill Level: Intermediate

Drying Time: 1–2 seconds

Recommended Temperature: 18–22°C

Recommended Humidity: 35–70%

Fume Level: Low

Retention: Up to approximately 6 weeks

Formula: Clear, pigment-free, oil-resistant, latex-free and formulated without formaldehyde

Ingredients: Ethyl Cyanoacrylate, Polymethyl Methacrylate

Storage: Store at 15–25°C in a cool, dry place away from direct sunlight

Unopened Shelf Life: Up to approximately 5 months

After Opening: Use within approximately 4 weeks

Store the bottle upright in a dark, airtight container with silica gel and keep it away from direct sunlight, indoor lighting, excess moisture, fans, and vents.

Does Perfect Clear dry completely transparent?

Yes. Perfect Clear uses a clear, pigment-free base, so the cured attachment does not leave the black appearance associated with carbon-black lash adhesives.

Why is clear adhesive particularly useful for color lashes?

Black adhesive can create a dark attachment point that changes the appearance of lighter or brightly colored extensions. Clear adhesive helps preserve the intended color from the base of the extension, making it especially useful for creative and multicolor lash designs.

Can Perfect Clear also be used with regular black lash extensions?

Yes. Clear adhesive is not limited to color lashes. Artists can also use it with standard black extensions when they prefer a transparent attachment or want to avoid visible black adhesive buildup.

Does low fume mean the adhesive cannot cause an allergic reaction?

No. Perfect Clear still contains ethyl cyanoacrylate, so low fumes do not mean allergy-free. Clients with a known cyanoacrylate allergy should not be treated with a cyanoacrylate-based adhesive.

Why do my extensions sometimes pop off when I brush them after application?

This can happen when the adhesive cures before the extension achieves full contact with the natural lash. If lashes repeatedly pop off, your adhesive may be curing faster than your placement speed. Check your room conditions and make sure you move directly from dipping to attachment.