Name: Promade Fans Loose 10D 0.03
Brand: Curacoro
Price: 25.49 CAD
Availability: InStock
Rating: 5.0 (36 reviews)

In stock.Ships in 24h · Free shipping over $50

Free shippingOrders $125+

Expert-ApprovedPro-tested & recommended

Customer FavoriteLoved by verified buyers

Hassle-Free Returns30-day guarantee

Promade Fans Loose 10D 0.03

Ten ultra-fine fibres for dense, featherlight everyday volume

Promade Fans Loose 10D 0.03 give artists genuine mega-volume density in a single-spec box. Ten 0.03 pro-silk fibres per fan produce dense, fluffy coverage that closes the gaps a lower fibre count leaves, while the ultra-fine diameter keeps the total weight comfortably within what a healthy natural lash can carry. The widest curl range at this density - C, CC, D and DD - across an 8-20mm length span, with 480-520 fans per box and one curl and length per box. Semi-glossed matte black finish on a tiny light-glue-bonded base, vegan, latex-free and cruelty-free. The entry point into fine-fibre mega-volume for artists ready to move past 0.05 work.

Product details

Trend/Popularity: Dense-but-light is the specification behind most of the volume sets clients screenshot, because it produces fullness in photographs without the visible weight that makes a set look overloaded.
Ease & Speed: Ten fibres per fan reach full coverage in fewer placements than a 5D or 6D set, so the artist gains time on the placement stage rather than losing it to the finer diameter.
Income Opportunity: Mega-volume pricing applies from 10D upward on most menus, so this is the density where a studio's rate steps up while the appointment length stays broadly comparable to a full 5D set.

Artists entering mega-volume: The most forgiving fine-fibre density, and the natural first step past 0.05 work.
Studios pricing a volume tier: A clear specification break that supports a higher rate on the menu.
Artists with lash-health-conscious clients: Fine fibre delivers density to clients who have been advised against thicker extensions.
Artists needing a wide curl range: C, CC, D and DD covers flat lashes through to strongly lifted looks in one product line.

The specification behind density that does not read as weight.

10D at 0.03mm - Fibre count closes placement gaps while per-fibre mass stays minimal.
Tiny light-glue-bonded base - Ten fine fibres converge to a narrow attachment point, keeping the lash line clean.
C, CC, D and DD curls - The widest curl range at this density, including DD for maximum lift on flat lash angles.
8-20mm length span - Covers short inner-corner work through to long outer-corner statements in one product line.
PBT pro-silk fibre - Holds engineered curl under humidity instead of the fine fibres relaxing together.
Semi-glossed matte black - Fine fibre at density can read reflective; the matte finish keeps it looking soft.
One curl and length per box, 480-520 fans - Consistent spec throughout, so a dense set has no accidental steps.

Cleanse and prime the natural lashes and assess strength before committing to 10D.
Tape and map the eye, choosing curl per zone rather than one curl throughout.
Isolate a single natural lash cleanly - at this fibre count stickies are harder to release.
Dispense a generous glue dot and refresh it regularly, since a thickening dot floods fine fibre.
Dip only the base tip; 0.03 wicks adhesive far faster than 0.05 or 0.07.
Place the fan and confirm it has stayed open before releasing.
Space wider than at 5D, since ten fibres fill faster.
Comb through, check each section for stickies, and cure fully.

Dipping at 0.07 depth - the most common error moving into fine fibre; the fan floods and closes into a spike. Base tip only.
Placing at 5D spacing - ten fibres cover more ground and the set closes up. Widen and judge on coverage.
Reaching for DD by default - DD is a corrective curl for flat lash angles, not a universal upgrade. Use it where the natural lash needs it.
Letting the glue dot age - a skinned dot grabs excess adhesive and clumps the fan. Refresh far more often than at coarser diameters.
Running 20mm across a wide span - length at this reach exceeds what most natural lashes can carry. Restrict long lengths to a few outer placements.

10D 0.03 VS. 5D 0.07

Finish - 10D 0.03: Soft, dense, blended | 5D 0.07: Structured, defined fans
Total fan weight - 10D 0.03: Comparable or lighter | 5D 0.07: Comparable or heavier
Fibre visibility - 10D 0.03: Fibres merge into fullness | 5D 0.07: Individual fibres read distinctly
Adhesive handling - 10D 0.03: Demanding - floods easily | 5D 0.07: Forgiving
Best client - 10D 0.03: Wants fullness, any healthy lash type | 5D 0.07: Wants visible, deliberate lash work
Menu position - 10D 0.03: Mega-volume tier | 5D 0.07: Standard volume tier

Materials: PBT (polybutylene terephthalate) pro-silk fibre with a light cosmetic bonding agent at the base. Vegan, latex-free and cruelty-free. Patch test new clients for adhesive sensitivity.

I am moving from 0.05 to 0.03 and my fans keep closing - what changes at this diameter?

Wicking. Finer fibre draws adhesive up into the fan far more readily, so a dip depth that worked at 0.05 delivers proportionally more glue and collapses the fan. Halve your dip depth and refresh the glue dot noticeably more often than you are used to.

When is DD curl actually the right choice here?

On natural lashes that grow very straight or downward, where a D curl still fails to create visible lift. On lashes that already have natural lift, DD tends to push the fan back toward the lid and shortens the visible lash line, so it works against you.

Does 10D at 0.03 hold up as well as 5D at 0.07 through a full cycle?

Retention depends on the base rather than the density, and if anything a lighter total load helps. The variable that changes is technique - fine fibre is less forgiving of a rushed or flooded base, so retention differences usually trace back to application rather than to the product.

How do I stop a 10D set from looking like a dark strip?

Vary length more deliberately and avoid running one length across a wide span; at this density the eye reads the silhouette of the set rather than individual fans. Mixing curl through the map helps too, because uniform curl at high density flattens the shape.

Can I use 20mm at 10D on a regular client?

Only on a few placements at the outer corner and only where the natural lash is genuinely strong. Across a map, a 20mm fan exceeds safe length for almost any natural lash regardless of how light the fibre is, because the leverage rather than the weight is the limiting factor.